$51.99
CZ P10 C / P10 F / P10 SC IWB Kydex Holster — Streamlight TLR-7 / TLR-7A / TLR-8 / TLR-8A / TLR-8A G
Three Platforms, Three Shells — Why Each Fits Differently The CZ P10 C, P10 F, and P10 SC are not size variants of a single design — they are distinct pistols with different slide lengths and frame profiles that require individually molded shells. The P10 C has a 4.02″ barrel and an overall length of 7.3″; the P10 F has a 4.5″ barrel and an overall length of 8.0″ with a taller 5.91″ frame. The P10 SC uses the P10 F’s longer 4.5″ barrel set into the P10 C’s compact frame — a combination that produces its own profile, longer at the muzzle end than the P10 C and shorter at the grip end than the P10 F. Each model is listed here separately. Confirm your exact model before ordering — the shell for the P10 C will not correctly seat a P10 F, and the P10 SC’s hybrid geometry makes it incompatible with either of the other shells.
Streamlight Variants — What Shares a Shell and What Does Not This holster covers the TLR-7, TLR-7A, TLR-8, TLR-8A, and TLR-8A G. The TLR-7 and TLR-7A share the same physical body dimensions — the TLR-7A differs only in its rear switch ergonomics, not in housing geometry, so both fit the same shell. The TLR-8 adds a red laser module that slightly increases the light’s overall profile height compared to the TLR-7 — it does not share the TLR-7’s shell. The TLR-8A and TLR-8A G are a newer generation: both measure 2.58″ in length and weigh 2.64 oz, with the TLR-8A using a red laser and the TLR-8A G using a green laser at identical body dimensions — both fit the same shell. The TLR-7X is not included in this listing — the TLR-7X uses a rechargeable battery system and has a different body profile intended for full-size pistols with 1913 Picatinny rails, making its footprint incompatible with the shells listed here.
CZ P10 OR Variants and Optic Compatibility The P10 C OR and P10 F OR ship with slides pre-cut for direct optic mounting. This shell includes an optic cut at the rear of the slide window to accommodate a mounted red-dot on OR variants — the cut does not interfere with holstering on non-OR variants. If you are running an OR variant with a mounted optic, confirm that the optic’s body height does not exceed the shell’s cut clearance before holstering.
Light-First Fit Requirement The shell is molded around the combined profile of the CZ P10 frame and the mounted Streamlight. The light must be attached to the rail before holstering — the shell indexes off the light body as part of its retention geometry. Holstering any P10 variant without the light installed will not produce a functional fit and may damage the shell’s retention contact point.
Shell Construction Full Kydex construction throughout. The trigger guard is fully enclosed within the mold from holster entry through the base of the guard. When the P10 with mounted Streamlight reaches full seating depth, the Kydex snaps back at the retention contact point, confirming seating audibly. The sweat guard extends behind the slide, keeping the rear of the frame off direct skin contact during IWB carry.
Retention and Cant The retention screw is positioned at the Streamlight body interface. Test retention with the fully loaded firearm and mounted light before daily carry — the correct retention setting will hold the pistol through inversion without movement while still allowing a clean, one-motion draw. Cant adjusts from 0° to 15° at the belt clip, covering strong-side and appendix carry positions. The P10 F’s full-size frame and 8.0″ overall length with a mounted Streamlight produces a longer holstered profile — a neutral cant (0°) at the 3–4 o’clock position manages that length more comfortably than appendix carry for most body types. The P10 C and P10 SC are more practical for appendix carry given their shorter overall dimensions.
Maintenance Keep the shell away from sustained heat sources. Clean with a damp cloth only — avoid solvents and abrasive materials. Check and tighten retention and clip screws at regular intervals. Do not apply lubricant to the screw hardware — lubricant attracts debris and promotes retention drift over time.
Disclaimer: Brand and model names are used solely to indicate compatibility. This holster is not manufactured by, affiliated with, endorsed by, or associated with CZ-USA or Streamlight.
Enjoy free U.S. shipping on all orders with Coldre Store.
Questions? Contact us at info@coldrestore.com or +1 575 210 8202 (Mon–Fri, 9 AM – 6 PM EST).
Contact us at:
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Absolutely love it! Clips are tight and strong I can clip it to the inside of my car door, belt, pants, shorts pretty much anything and it remains stable. very nice fit no room for an accidental trigger pull and is minimalistic with room for an optic and my tlr7x. completely blown away with the price, they could be charging a lot more for this excellent product!