$51.99
One Listing. Three Dedicated Variations. This holster is available for all three CZ P-10 platforms — the P-10 C, P-10 F, and P-10 SC — each as a separately molded shell within this same product listing. Select your exact model when ordering. The P-10 C, P-10 F, and P-10 SC are not size variants of a single design; they are distinct pistols with different slide lengths and frame profiles that each require their own shell geometry to fit correctly. The P-10 C has a 4.02″ barrel and an overall length of 7.3″. The P-10 F has a 4.5″ barrel and an overall length of 8.0″ with a taller 5.91″ frame. The P-10 SC uses the P-10 F’s 4.5″ barrel set into the P-10 C’s compact frame — a hybrid profile that is longer at the muzzle end than the P-10 C and shorter at the grip end than the P-10 F. Confirm your exact model before ordering — the shell for the P-10 C will not correctly seat a P-10 F, and the P-10 SC’s geometry makes it incompatible with either of the other shells.
Streamlight Compatibility — What Shares a Shell and What Does Not This holster covers the TLR-7, TLR-7A, TLR-8, TLR-8A, and TLR-8A G. The TLR-7 and TLR-7A share the same physical body dimensions — the TLR-7A differs only in its rear switch ergonomics, not in housing geometry — so both fit the same shell. The TLR-8 adds a red laser module that slightly increases the light’s overall profile height compared to the TLR-7; it does not share the TLR-7’s shell. The TLR-8A and TLR-8A G are a newer generation: both measure 2.58″ in length and weigh 2.64 oz, with the TLR-8A using a red laser and the TLR-8A G a green laser at identical body dimensions — both fit the same shell. The TLR-7X is not covered in this listing, as its rechargeable system and Picatinny-rail body produce a footprint that is incompatible with the shells listed here.
CZ P-10 OR Variants and Optic Compatibility The P-10 C OR and P-10 F OR ship with slides pre-cut for direct optic mounting. Each shell in this listing includes an optic cut at the rear of the slide window to accommodate a mounted red dot on OR variants — the cut does not interfere with holstering on non-OR variants. If you are running an OR variant with a mounted optic, confirm that the optic’s body height does not exceed the shell’s cut clearance before holstering.
Light-First Fit Requirement The shell is molded around the combined profile of the CZ P-10 frame and the mounted Streamlight. The light must be attached to the rail before holstering — the shell indexes off the light body as part of its retention geometry. Holstering any P-10 variant without the light installed will not produce a functional fit and may damage the shell’s retention contact point.
Shell Construction Full Kydex construction throughout. The trigger guard is fully enclosed within the mold from holster entry through the base of the guard. When the P-10 with mounted Streamlight reaches full seating depth, the Kydex snaps back at the retention contact point, confirming seating audibly. The sweat guard extends behind the slide, keeping the rear of the frame off direct skin contact during IWB carry.
Retention and Cant The retention screw is positioned at the Streamlight body interface. Test retention with the fully loaded firearm and mounted light before daily carry — the correct retention setting will hold the pistol through inversion without movement while still allowing a clean, one-motion draw. Cant adjusts from 0° to 15° at the belt clip, covering strong-side and appendix carry positions. The P-10 F’s full-size frame and 8.0″ overall length with a mounted Streamlight produces a longer holstered profile — a neutral cant (0°) at the 3–4 o’clock position manages that length more comfortably than appendix carry for most body types. The P-10 C and P-10 SC are more practical for appendix carry given their shorter overall dimensions.
Selecting Your Variation
P-10 C + TLR-7 / TLR-7A — compact frame, light-only Streamlight
P-10 C + TLR-8 / TLR-8A / TLR-8A G — compact frame, light/laser Streamlight
P-10 F + TLR-7 / TLR-7A — full-size frame, light-only Streamlight
P-10 F + TLR-8 / TLR-8A / TLR-8A G — full-size frame, light/laser Streamlight
P-10 SC + TLR-7 / TLR-7A — hybrid frame, light-only Streamlight
P-10 SC + TLR-8 / TLR-8A / TLR-8A G — hybrid frame, light/laser Streamlight
Care and Maintenance Keep the shell away from sustained heat sources — a vehicle left in direct sunlight can generate enough heat to deform the Kydex over time. Clean with a damp cloth only; avoid solvents and abrasive materials. Check and tighten retention and clip screws at regular intervals. Do not apply lubricant to the screw hardware — lubricant attracts debris and promotes retention drift over time.
Package Contents 1 × IWB Kydex Holster for CZ P-10 (variation per model selected at checkout). Pistol, weapon light, belt, and any accessories shown in product images are not included.
Legal and Trademark Disclaimer Brand and model names are used solely to indicate compatibility. This holster is not manufactured by, affiliated with, endorsed by, or associated with CZ-USA, Česká zbrojovka, or Streamlight. “CZ”, “P-10 C”, “P-10 F”, “P-10 SC”, “Streamlight”, “TLR-7”, “TLR-7A”, “TLR-8”, “TLR-8A”, and “TLR-8A G” are trademarks of their respective owners.
Enjoy free U.S. shipping on all orders with Coldre Store.
Questions? Contact us at info@coldrestore.com or +1 575 210 8202 (Mon–Fri, 9 AM – 6 PM EST).
Contact us at:
Verified owner
Verified owner
Verified ownerAbsolutely love it! Clips are tight and strong I can clip it to the inside of my car door, belt, pants, shorts pretty much anything and it remains stable. very nice fit no room for an accidental trigger pull and is minimalistic with room for an optic and my tlr7x. completely blown away with the price, they could be charging a lot more for this excellent product!
