Beretta 92FS 92A1 96A1 IWB Kydex Holster

Beretta 92FS / 92A1 / 96A1 IWB Kydex Holster

How One Shell Covers All Three Variants The Beretta 92FS (9mm), 92A1 (9mm), and 96A1 (.40 S&W) share the same slide length of 5.0″, height of 5.40″, and overall length of 8.54″. The practical difference between the 92FS and the A1 models is the dustcover: the 92A1 and 96A1 have an integrated Picatinny rail and a marginally wider dustcover, while the 92FS has a smooth, rail-free dustcover. This shell includes a relief cut at the dustcover that accommodates the A1 series rail without creating functional gaps on the 92FS — the 92FS’s smooth dustcover seats within the same space without interference. Retention indexes off the slide and trigger guard, which are common geometry across all three variants.

Caliber Difference — No Effect on Fit The 92A1 and 96A1 are the same pistol in different calibers — 9mm and .40 S&W respectively. External dimensions are identical between the two. The caliber difference does not alter any surface that contacts the shell.

Slide-Mounted Safety — Consistent Across All Three The 92FS, 92A1, and 96A1 all use the same slide-mounted decocker/safety system, with two lever projections on the rear flanks of the slide. There is no difference in slide profile at the safety position across these three variants — all three present the same contact surface to the shell at that point.

The following variants are not compatible with this holster:

• Beretta 92X / 92X Performance — different frame and slide geometry

• Beretta 92 Compact / Vertec — shorter barrel and different frame profile

• Taurus PT92 / PT100 — visually similar but frame-mounted safety alters the slide contact surface; requires a dedicated shell

• Any variant with a rail-mounted weapon light or laser — this shell is molded for the bare frame; an attached accessory will prevent correct seating

IWB Carry Considerations for a Full-Size Platform At 8.54″ overall length and approximately 33–34 oz unloaded, the 92FS/92A1/96A1 family is one of the longest and heaviest platforms in this format for IWB carry. A rigid belt of at least 1.5″ width is required to support the weight without the holster sagging or rotating on the beltline. Strong-side carry at the 3–4 o’clock position with a neutral cant (0°) distributes the pistol’s length along the hip where the body’s natural contours provide support. Appendix carry is possible but the combined weight and 8.54″ length make it significantly more demanding than with compact or subcompact platforms — if appendix is the chosen position, a neutral cant is the most practical option.

Shell Construction Full Kydex construction throughout. The trigger guard is fully enclosed within the mold from holster entry through the base of the guard. When the pistol reaches full seating depth, the Kydex snaps back at the retention contact point, confirming seating audibly. The sweat guard extends behind the slide, keeping the rear of the frame off direct skin contact during IWB carry.

Retention and Cant The retention screw is accessible from the exterior of the shell and adjustable without removing the holster from the belt. At 33–34 oz unloaded, these pistols carry more momentum during movement than compact platforms — set retention firm enough to hold the pistol through full inversion before daily carry. Cant adjusts from 0° to 15° at the belt clip.

Maintenance Keep the shell away from sustained heat sources. Clean with a damp cloth only — avoid solvents and abrasive materials. Check and tighten retention and clip screws at regular intervals. Do not apply lubricant to the screw hardware — lubricant attracts debris and promotes retention drift over time.

Disclaimer: Brand and model names are used solely to indicate compatibility. This holster is not manufactured by, affiliated with, endorsed by, or associated with Beretta.

• Country: USA
• Payment Currencies: USD
• Payment Options: Visa, MasterCard, American Express, Discover, Apple Pay, Google Pay

View Billing Terms

Enjoy free U.S. shipping on all orders with Coldre Store.

• Processing: Orders placed after 2:00 PM EST are processed the next business day (1–3 business days).
• Delivery: Estimated 7–10 business days via USPS, UPS, or FedEx.
• Tracking: You’ll receive a tracking number by email once your order ships.
• Issues: For delays, lost, or damaged packages, contact info@coldrestore.com or +1 575 210 8202.

• Return Window: 30 days from delivery. Items must be unused with original packaging and tags.
• Return Shipping: Free for defective or incorrect items. For a change of mind, return shipping is your responsibility. Original shipping fees are non-refundable.
• How to Return: Email info@coldrestore.com with your order number, repack the item, and follow the return instructions provided.
• Refunds: Processed to the original payment method within 7 business days after inspection.
• Exchanges: Contact us for size, color, or model exchanges where available.
• Non-Returnable Items: Hygiene, safety, or customized items may not be returned.

Questions? Contact us at info@coldrestore.com or +1 575 210 8202 (Mon–Fri, 9 AM – 6 PM EST).

Contact us at:

1. Contact Page
2. Email: info@coldrestore.com
3. Phone: +1 575 210 8202 
   Hours: Mon–Fri, 9 AM – 6 PM EST
   Response Time: 36h
   View FAQs

View Privacy Policy