Smith & Wesson M&P Shield M2.0 with Integrated Laser IWB Kydex Holster

Smith & Wesson M&P Shield M2.0 with Integrated Crimson Trace Laser IWB Kydex Holster

Why This Shell Exists Separately from the Standard Shield M2.0 The M&P Shield M2.0 with integrated Crimson Trace laser has a different grip module profile than the standard Shield M2.0 without a laser. The Crimson Trace laser unit is built into the front of the trigger guard on the grip module, adding a projection that changes the frame’s geometry at that location. Standard Shield M2.0 holsters explicitly exclude the integrated laser variant because the laser housing prevents correct seating in a shell molded for the bare frame. This shell is molded specifically for the Shield M2.0 with the integrated Crimson Trace laser present — it will not produce correct fit on a standard Shield M2.0 without the laser.

Red Laser vs Green Laser — Same Shell The integrated Crimson Trace laser is available in red and green versions. Both use the same physical housing geometry mounted at the same position on the trigger guard. The color difference is entirely optical — the laser module body dimensions are identical between red and green variants. This shell accommodates both configurations without modification.

Caliber Variants — 9mm and .40 S&W The Shield M2.0 with integrated laser is available in 9mm and .40 S&W. Both calibers use the same frame and slide external dimensions: 6.1″ overall length, 4.6″ height, 0.95″ width, and a 3.1″ barrel. The caliber difference does not alter any surface that contacts the shell.

M&P Shield M2.0 vs M&P M2.0 — Not the Same Firearm The Shield M2.0 and the M&P M2.0 share a similar name but are different pistols with different frame geometries — holsters for one are not interchangeable with the other. This holster is molded for the Shield M2.0 (compact single-stack platform, 6.1″ overall). The M&P M2.0 full-size and compact are larger, wider pistols that require separate shells.​

The following variants are not compatible with this holster:

• Standard M&P Shield M2.0 without integrated laser — the bare frame does not fill the laser relief cut correctly, producing an inconsistent retention contact point​

• Shield Plus — different frame width and grip geometry

• Shield EZ / Equalizer — different frame profile and slide geometry

• M&P Shield M2.0 .45 ACP — 3.3″ barrel and different slide length require a separate shell​

Shell Construction Full Kydex construction throughout. The trigger guard is fully enclosed within the mold from holster entry through the base of the guard — the laser housing at the front of the trigger guard is accounted for within the mold, keeping the trigger fully covered. When the Shield M2.0 with laser reaches full seating depth, the Kydex snaps back at the retention contact point, confirming seating audibly. The sweat guard extends behind the slide, keeping the rear of the frame off direct skin contact during IWB carry. At 6.1″ overall, 0.95″ width, and approximately 21.3 oz loaded, the Shield M2.0 with laser is a practical carry platform in both appendix and strong-side positions.​

Retention and Cant The retention screw is accessible from the exterior of the shell and adjustable without removing the holster from the belt. The laser housing’s presence at the trigger guard creates an additional contact point within the shell that contributes to passive retention consistency — the laser body indexes against the shell in a fixed position, reducing retention variation across draw cycles. Test retention with the fully loaded firearm before daily carry. Cant adjusts from 0° to 15° at the belt clip.

Maintenance Keep the shell away from sustained heat sources. Clean with a damp cloth only — avoid solvents and abrasive materials. Check and tighten retention and clip screws at regular intervals. Do not apply lubricant to the screw hardware — lubricant attracts debris and promotes retention drift over time.

Disclaimer: Brand and model names are used solely to indicate compatibility. This holster is not manufactured by, affiliated with, endorsed by, or associated with Smith & Wesson or Crimson Trace.

• Country: USA
• Payment Currencies: USD
• Payment Options: Visa, MasterCard, American Express, Discover, Apple Pay, Google Pay

View Billing Terms

Enjoy free U.S. shipping on all orders with Coldre Store.

• Processing: Orders placed after 2:00 PM EST are processed the next business day (1–3 business days).
• Delivery: Estimated 7–10 business days via USPS, UPS, or FedEx.
• Tracking: You’ll receive a tracking number by email once your order ships.
• Issues: For delays, lost, or damaged packages, contact info@coldrestore.com or +1 575 210 8202.

• Return Window: 30 days from delivery. Items must be unused with original packaging and tags.
• Return Shipping: Free for defective or incorrect items. For a change of mind, return shipping is your responsibility. Original shipping fees are non-refundable.
• How to Return: Email info@coldrestore.com with your order number, repack the item, and follow the return instructions provided.
• Refunds: Processed to the original payment method within 7 business days after inspection.
• Exchanges: Contact us for size, color, or model exchanges where available.
• Non-Returnable Items: Hygiene, safety, or customized items may not be returned.

Questions? Contact us at info@coldrestore.com or +1 575 210 8202 (Mon–Fri, 9 AM – 6 PM EST).

Contact us at:

1. Contact Page
2. Email: info@coldrestore.com
3. Phone: +1 575 210 8202 
   Hours: Mon–Fri, 9 AM – 6 PM EST
   Response Time: 36h
   View FAQs

View Privacy Policy